HP LaserJet Pro M476dn Driver For Windows 10

January 14, 2018
Abouts HP LaserJet Pro M476dn is a shade laser multifunction peripheral (MFP) aimed toward domestic and small office use. It's moderately nicely prepared for the rate, helping stressed out networks, and capable of printing and scanning to a USB flash drive. Not handiest can it print mechanically on both aspects of a sheet of paper (duplex printing), however it could experiment both aspects of a sheet in a single skip - quicker and much less in all likelihood to jam than routinely turning the paper over. Control is thru a color touchscreen which leaves the front panel freed from muddle, however we are no longer certain this is HP's best effort - it seemed sluggish to reply at instances, and would not be given swipe gestures.

Performance HP LaserJet Pro M476dn

Image From End
This is quite a clever MFP, and in regions it feels in particular well constructed. The 50-page computerized file feeder (ADF) sits on strong hinges which expand as much as permit the lid to close flat on thick originals along with a mag. The 250-sheet paper cassette glides inside and outside easily in preference to clattering about. Unfortunately, the tray itself is unimpressive, feeling skinny and flexible, and with the paper orientation stamped into the lowest plate in a way that it's blanketed up the moment you load it with paper; no longer tremendous if you want to manually print at the flip side of some pages, as an example. If you're printing 50 sheets or fewer you could use the multipurpose feed that folds down from the the front panel. With most effective an optionally available 250-sheet paper feed available, there may be constrained scope to expand this MFP.

The M476dn is simple to set up and install, aside from an unusual query wherein you ought to determine if it will be self-managed, IT-managed, or whether or not it's going to print a configuration sheet. We guessed at self-managed and regarded to get on great after that, despite the fact that like many printers the default settings encompass sending utilization facts returned to the manufacturer: we have no concept why this is so giant, or why it's usually decided on by means of default.

While we are complaining approximately HP's software program, it is unfortunate that this MFP makes use of the equal over-simplified scan interface that we so regularly criticise. This has no computerized selection or publicity settings, has a sophisticated settings page that does not include any specially superior settings, and gives a constrained variety of preset resolutions which would not encompass one hundred fifty dots consistent with inch (dpi) - a commonplace placing which we use for one of our timed assessments. On gadgets with an ADF, consisting of this one, it's not possible to pick out resolutions above 300dpi except you specify the platen glass as the file supply, so it is bizarre that the software program's picture setting does not do that for you. The interface recalls neither preview pix nor user-defined settings between sessions, unless you keep the latter manually.
  • Functions: Print / Copy / Scan / Fax
  • Tray 1: A4, A5, A6, B5 (JIS), 10 x 15 cm, Postcards (JIS Single, JIS Double), Envelopes (ISO DL, ISO C5, ISO B5); Tray 2, optional Tray 3: A4, A5, A6, B5 (JIS), 10 x 15 cm, Postcards (JIS Single, JIS Double), Envelopes (ISO DL, ISO C5, ISO B5); Duplex unit for automatic two-sided printing: A4, B5
  • Hi-Speed ​​USB 2.0; Fast Ethernet 10 / 100Base-TX; Host USB
  • Up to 40,000 pages
  • Contents: HP Color LaserJet Pro MFP M476dn (ML)
  • Fax Feature
  • Flatbed with automatic document feeder

Specifications HP LaserJet Pro M476dn
Image Back End
Tehnical Detail
model numberCF386A # B19
Product weight28.8 kg
product dimensions48.5 x 41.9 x 50 cm
Manufacturer numberCF386A

HP LaserJet M476dn Drivers And Software

  • HP LaserJet Pro M476dn For Windows 10 x32 - Download
  • HP LaserJet Pro M476dn For Windows 10 x64 - Download
  • HP LaserJet Pro M476dn MAC OSX - Download

Compatible With your Operating System.

  • Windows XP 32-bit 
  • Windows XP 64-bit
  • Windows Vista 32-bit
  • Windows Vista 64-bit
  • Windows 7 32-bit
  • Windows 7 64-bit
  • Windows 8 32-bit
  • Windows 8 64-bit
  • Windows 8.1 32-bit
  • Windows 8.1 64-bit
  • Windows 10 32-bit
  • Windows 10 64-bit

How To Install Driver Setup HP LaserJet Pro M476dn ?

  • Switch on your computer where you want to install HP LaserJet Pro M476dn All-in-One printer driver.
  • Until unless you suggested to connect USB cable to the computer, please don’t connect it.
  • Download the setup file from above link if you didn’t download them yet. Run the setup file as administrator. It triggers to start the installation wizard. Then follow the instructions until to finish it.
  • at the execution of this wizard you have to connect USB cable between HP LaserJet Pro M476dn All-in-One printer and your computer.
  • So wait for that and connect only when it asks you to connect. It will detect the HP LaserJet Pro M476dn All-in-One printer and go ahead to next step if all goes well.
  • Input the values for each step in the wizard and complete the install.
  • Now your printer is ready to use as the software of HP LaserJet Pro M476dn software installed successful.

More Importants :

- Before installation Drivers or Software HP LaserJet Pro M476dn, save all your work and close all the running programs, as the installation may interfere with other apps;
- If the setup wizard requests Administrative rights, make sure to run the setup as Administrator;
- Pay attention to all installation instructions to make sure the driver is installed correctly;

Costumer Reviews From Amazon

HP LaserJet Pro M476dn

I had an HP color laser printer before (2605dn) - which unfortunately did not print well anymore - but he had a few years on his back.
I looked around for a long time - the print quality and (duplex) printing unit were important to me. Also, the functionality, "just" to make a copy without having to strike the computer, I had painfully missed in the past. After long searches + Abklappern various (previously less) tests, I have decided for the M476dn.

For the menu here have some already written something - yes, is not so well done - but for the basic functions you need not synonymous in the submenus. But if you want to make a double-sided copy ... - that certainly will be easier. But is to act and is really "whining at a high level" - for this I would not give a star deduction.

What counts for me are the print results - and compared to my old HP 2605dn are worlds there (of course) - in the tests with other current printers, the print result was always one of the best.

The problems / bad handling with the "Scan to network path" I can not confirm - I just added a new folder on my NAS on the printer's website. If I now want to scan directly to the printer in a network folder, I immediately the added network path is displayed - 1x clicked, done.

Share this :

Next Post »
0 Comment